Click on
Image to Enlarge |
|
The Titan Distributor provides regulated voltage
protection for up to 5 servo functions with 5 regulated
output ports rated at either 5.2V or 6V and 5 bypassed
(unregulated up to 10V) ports. The Titan Distributor
eliminates the dangers of mixing higher voltage power
systems to standard voltage servos and gyros that only
have voltage limits of 6 volts or less. The Titan
Distributor uses a powerful no noise linear regulator
that will not interfere with any radio system with
current loads of up to 10 Amps continuous. It includes a
built in battery monitor that provides visual feedback
for your connected battery. The battery monitor is
capable of measuring the battery strength from 6V to 9V
with the aid of 7 LEDs which result in 0.5V resolution
readings. The Titan Distributor is ideally to be used as
a regulator and power bus with gyros and servo motors in
R/C aircraft models. There are a total of up to 5
channels of servos that can be used, each individual
channel has a linear regulated 5.2/6V port and a raw
battery bypass port with the signal pin tied together.
This allows the Titan Distributor to be used to supply
high performance servos with raw battery voltages
typically 7.4V up to 10V while still supply regulated
power back to the receiver for Tail/Rudder servos, Gyros
and other support equipment that requires regulated 6V
or less voltage. Also, the Titan Distributor can be used
to supply raw battery voltage to Receivers that can
handle higher voltages up to 10V while regulating 6V or
less power for to the Tail/Rudder servos, Gyros and
other support equipment. |
| SPECIFICATIONS: |
FEATURES: |
|
l |
Compact 6V/5.2V selectable linear
voltage regulator and power bus with 5 socket bus. |
Height ----- 20 mm |
|
|
Width ----- 21 mm |
l |
2 separate voltage outputs per paired
channel of one regulated 6V/5.2V and another for
unregulated output from your battery pack. |
|
Length ----- 50 mm (not including connector) |
|
|
Weight ----- 35 grams |
|
| |
l |
Ideal for 2 cell Lithium Polymer battery applications.
Wide input
voltage range of 6V min. to 10V max. |
|
Click to Download Instruction Manual |
l
|
Built-in battery monitor with 8 LED status indicators
gives visual feedback |
| |
l |
High total current capability of 10 amps continuous. |
| |
l
|
Ideal voltage management system for 3D pilots of R/C
helicopter models. |
| |
l
|
Built-in Thermal and Current overload protection. |
| |
l |
Includes five 8” male to male servo extensions plug for
easy
installation. |
| |
l
|
Ideal for any R/C models that are equipped with
servos/gyros requiring a 6V or 5.2V supply. |
|
PREVIEW GALLERY |
 |
Click on
Images to Preview |
